Jiménez Octavio, Jesús Ramón

Categoría: Propio Agregado de la Escuela Técnica Superior de Ingeniería (ICAI), Departamento de Ingeniería Mecánica

El Dr. Jesús R. Jiménez-Octavio obtuvo el título de Ingeniero Industrial por la Universidad Pontificia Comillas en 2004 y el grado de Doctor por la misma universidad en 2009. Su tesis doctora fue galardonada con el X Premio Talgo a la Innovación Tecnológica y con la Distinción de Honor a la Mejor Tesis Doctoral en Ingeniería de la Universidad Pontificia Comillas en 2010. Actualmente es Director de la Escuela Técnica Superior de Ingeniería ICAI y Profesor del Departamento de Ingeniería Mecánica de la Universidad Pontificia Comillas. Asimismo, desarrolla su actividad investigadora en el Instituto de Investigación Tecnológica (IIT). Su investigación se centra en mecánica computacional, con aplicaciones en dinámica estructural, y en biomecánica. Sus contribuciones científicas incluyen publicaciones en revistas internacionales, presentaciones en congresos internacionales y participación en proyectos de investigación competitivos y con empresas. Cuenta con tres sexenios consecutivos de investigación reconocidos por la Comisión Nacional Evaluadora de la Actividad Investigadora (CNEAI).

Contacto

Despacho: Dirección ICAI

Teléfono: 915422800 - 2739

Correo electrónico: joctaviocomillas.edu

Perfil del investigador CV externo / LinkedIn

Formación académica

Doctor/a Ingeniero Industrial, Universidad Pontificia Comillas.

Ingeniero Industrial, Universidad Pontificia Comillas.

Ingeniero Técnico Industrial: Especialidad Mecánica, Universidad Pontificia Comillas.

Áreas de Investigación

Sistemas ferroviarios.

Biomecánica.

Experiencia docente

El profesor Jesús Ramón Jiménez Octavio tiene 18 años de experiencia en esta Universidad, y en los últimos años ha impartido las siguientes asignaturas:


  • Análisis Dinámico y Vibraciones

  • Pensamiento Crítico

  • Trabajo Fin de Máster (MII)

  • Mecánica de Catenaria

  • Trabajo Fin de Grado

Publicaciones Seleccionadas
  • F. J. López Valdés, E. Jokubaityte, M. Valdano, C. Rodríguez-Morcillo García, C. J. Carpintero Rubio, J. M. Asensio Gil, J. R. Jiménez Octavio, Kinematics and belt loads of the pelvis of reclined female Post Mortem Human subjects in frontal impacts. Traffic Injury Prevention. Vol. online, nº Suppl. 1, págs. S361-S369, Octubre de 2026.. ISSN: 1538-9588. Repositorio: http://hdl.handle.net/11531/113594.
  • J. M. Rodríguez Zaldívar, G. Loroño Goikoetxea, J. R. Jiménez Octavio, S. M. Dorado Nuño, A. M.ª Arias Paniagua, Computational fluid dynamics analysis of conventional irrigation and the combination with adjuvant suction cannulas in human molars with isthmus communication. Odontology. Vol. online, págs. 996-1002, Julio de 2025.. ISSN: 1618-1247. Repositorio: http://hdl.handle.net/11531/97730.
  • S. Sochor, J. R. Jiménez Octavio, C. J. Carpintero Rubio, M. Sochor, J. M. Asensio Gil, C. Rodríguez-Morcillo García, F. J. López Valdés, Human Cervical Intervertebral Disc Pressure Response During Non-Injurious Quasistatic Motion: A Feasibility Study. Applied Sciences. Vol. online, nº 11, págs. 6167-6167, Junio de 2025.. ISSN: 2076-3417. Repositorio: http://hdl.handle.net/11531/101285.
  • S. M. Dorado Nuño, J. R. Jiménez Octavio, P. Riaza Solís, O. A. Peters, A. M.ª Arias Paniagua, Structural response of mandibular first molars in the presence of proximal contacts: finite element analysis with antagonist teeth and alternative loading applications. Clinical Oral Investigations. Vol. online, nº 4, págs. 214-214, Abril de 2025.. ISSN: 1432-6981. Repositorio: http://hdl.handle.net/11531/101300.
  • S. M. Dorado Nuño, A. M.ª Arias Paniagua, J. R. Jiménez Octavio, O. Peters, P. Riaza Solís, Structural response of mandibular first molars in the presence of proximal contacts: finite element analysis with antagonist teeth and alternative loading applications. Clinical Oral Investigations. Vol. 29, págs. on-line-on-line, Marzo de 2025.. ISSN: 1432-6981. Repositorio: http://hdl.handle.net/11531/98415.
  • R. Caro Carretero, A. Carnicero López, J. R. Jiménez Octavio, D. Cousineau, Utilizing jackknife and bootstrap to understand tensile stress to failure of an epoxy resin. Quality Engineering. Vol. online, nº 4, págs. 726-742, Diciembre de 2024.. ISSN: 0898-2112. Repositorio: http://hdl.handle.net/11531/86985.
  • S. M. Dorado Nuño, J. R. Jiménez Octavio, A. M.ª Arias Paniagua, G. Loroño Goikoetxea, J. M. Rodríguez Zaldívar, Computational fluid dynamics analysis of conventional irrigation and the combination with adjuvant suction cannulas in human molars with isthmus communication. Odontology. Págs. on-line-on-line, Noviembre de 2024.. ISSN: 1618-1247. Repositorio: http://hdl.handle.net/11531/96487.
  • M. Valdano, J. R. Jiménez Octavio, B. Pipkorn, Á. Otero Peinador, L. F. Sánchez Merchante, F. J. López Valdés, Evaluation of AIS3+ car occupant injuries using deterministic and probabilistic methods in frontal crashes. Computer Methods in Biomechanics and Biomedical Engineering. Vol. online, nº 12, págs. 1714-1730, Septiembre de 2024.. ISSN: 1025-5842. Repositorio: http://hdl.handle.net/11531/86999.
  • Á. Herrera Martín, M. Azabal, J. R. Jiménez Octavio, J. C. del Real Romero, S. López de Armentia Hernández, J. M. Asensio Gil, A. M.ª Arias Paniagua, Comparative analysis of surface roughness and plastic deformation of reciprocating instruments after clinical use. Materials. Vol. online, nº 16, págs. 3978-3978, Agosto de 2024.. ISSN: 1996-1944. Repositorio: http://hdl.handle.net/11531/96225.
  • J. M. Asensio Gil, J. R. Jiménez Octavio, A. Carnicero López, M. Valdano, D. Guzmán Terrón, F. J. López Valdés, Numerical analysis of injuries of e-scooter riders in frontal impacts against SUVs. Results in Engineering. Vol. online, págs. 101936-101936, Marzo de 2024.. ISSN: 2590-1230. Repositorio: http://hdl.handle.net/11531/87463.
  • M. Valdano, J. R. Jiménez Octavio, F. J. López Valdés, The effect of seatbelt pre-tensioners and load limiters in the reduction of MAIS 2+, MAIS 3+, and fatal injuries in real-world frontal crashes. Accident Analysis & Prevention. Vol. online, págs. 107180-107180, Septiembre de 2023.. ISSN: 0001-4575. Repositorio: http://hdl.handle.net/11531/87030.
  • G. Loroño Goikoetxea, J. M. Rodríguez Zaldívar, A. M.ª Arias Paniagua, S. M. Dorado Nuño, J. R. Jiménez Octavio, Influence of needle design and irrigation depth in the presence of vapor lock: A computational fluid dynamics analysis in human oval roots with apical ramification. International Journal for Numerical Methods in Biomedical Engineering. Vol. online, nº 8, págs. e3742-e3742, Agosto de 2023.. ISSN: 2040-7939. Repositorio: http://hdl.handle.net/11531/87047.
  • S. M. Dorado Nuño, G. Loroño Goikoetxea, J. R. Jiménez Octavio, A. M.ª Arias Paniagua, J. M. Rodríguez Zaldívar, Influence of needle design and irrigation depth in the presence of vapor lock: A computational fluid dynamics analysis in human oval roots with apical ramification. International Journal for Numerical Methods in Biomedical Engineering. Págs. on-line-on-line, Julio 2023.. ISSN: 2040-7939. Repositorio: http://hdl.handle.net/11531/79046.
  • S. M. Dorado Nuño, J. R. Jiménez Octavio, A. M.ª Arias Paniagua, Biomechanical Modelling for Tooth Survival Studies: Mechanical Properties, Loads and Boundary Conditions—A Narrative Review. Materials. Vol. 15, nº 21, págs. on-line-on-line, Noviembre de 2022.. ISSN: 1996-1944. Repositorio: http://hdl.handle.net/11531/75502.
  • S. M. Dorado Nuño, A. M.ª Arias Paniagua, J. R. Jiménez Octavio, Biomechanical modelling for tooth survival studies: mechanical properties, loads and boundary conditions—A narrative review. Materials. Vol. online, nº 21, págs. 7852-7852, Noviembre de 2022.. ISSN: 1996-1944. Repositorio: http://hdl.handle.net/11531/87127.
  • C. M.ª Vives Torres, M. Valdano, J. R. Jiménez Octavio, J. Muehlbauer, S. Schick, S. Peldschus, F. J. López Valdés, Comparison of upper neck loading in young adult and elderly volunteers during low speed frontal impacts. Frontiers in Bioengineering and Biotechnology. Vol. online, págs. 682974-682974, Diciembre de 2021.. ISSN: 2296-4185. Repositorio: http://hdl.handle.net/11531/57329.
  • A. Garrido Contreras, R. Caro Carretero, J. R. Jiménez Octavio, A. Carnicero López, M. Such Tabogada, A new approach to fitting the three-parameter Weibull distribution: An application to glass ceramics. Communications in Statistics - Theory and Methods. Vol. online, nº 14, págs. 3403-3420, Julio de 2021.. ISSN: 0361-0926. Repositorio: http://hdl.handle.net/11531/44022.
  • F. J. López Valdés, K. Bohman, J. R. Jiménez Octavio, D. Logan, W. Raphael, L. A. Quintana Jiménez, R. Suárez del Fueyo, S. Koppel, Understanding users’ characteristics in the selection of vehicle seating configurations and positions in fully automated vehicles. Traffic Injury Prevention. Vol. online, nº Supl 1, págs. S19-S24, Octubre de 2020.. ISSN: 1538-9588. Repositorio: http://hdl.handle.net/11531/56084.
  • G. Loroño Goikoetxea, J. M. Rodríguez Zaldívar, J. R. Jiménez Octavio, S. M. Dorado Nuño, A. M.ª Arias Paniagua, R. Cisneros Cabello, CFD analysis on the effect of combining positive and negative pressure during the irrigation of artificial isthmuses. International Journal for Numerical Methods in Biomedical Engineering. Vol. online, nº 10, págs. e3385-e3385, Octubre de 2020.. ISSN: 2040-7939. Repositorio: http://hdl.handle.net/11531/56088.
  • G. Loroño Goikoetxea, J. M. Rodríguez Zaldívar, A. M.ª Arias Paniagua, R. Cisneros Cabello, S. M. Dorado Nuño, J. R. Jiménez Octavio, Positive and negative pressure irrigation in oval root canals with apical ramifications: a computational fluid dynamics evaluation in micro-CT scanned real teeth. International Endodontic Journal. Vol. online, nº 5, págs. 671-679, Mayo de 2020.. ISSN: 0143-2885. Repositorio: http://hdl.handle.net/11531/43813.
  • S. Koppel, J. R. Jiménez Octavio, K. Bohman, D. Logan, W. Raphael, L. A. Quintana Jiménez, F. J. López Valdés, Seating configuration and position preferences in fully automated vehicles. Traffic Injury Prevention. Vol. online, nº Sup 2, págs. S103-S109, Noviembre de 2019.. ISSN: 1538-9588. Repositorio: http://hdl.handle.net/11531/43620.
  • J. C. del Real Romero, J. R. Jiménez Octavio, R. Manoharan, R. S. Muthuselvam, R. Joseph, H. H. Sakthi Sudhan, Characterisation of mechanical properties of aluminium composites fabricated by stir-casting and powder metallurgy. International Journal of Mechanical Engineering and Technology. Vol. online, nº 6, págs. 176-189, Junio de 2017.. ISSN: 0976-6340. Repositorio: http://hdl.handle.net/11531/27511.
  • J. C. del Real Romero, J. R. Jiménez Octavio, H. H. Sakthi Sudhan, R. Manoharan, R. Inbaraj, Characterisation and cohesive zone modelling of adhesives and bone cements used in prothesis fixation surgeries. International Journal of Multidisciplinary Educational Research. Vol. online, nº 4, págs. 260-278, Abril de 2017.. ISSN: 2277-7881. Repositorio: http://hdl.handle.net/11531/18436.
  • V. Villapún Puzas, R. Condominas Minoves, M.ª Y. Ballesteros Iglesias, J. R. Jiménez Octavio, V. Ramos Pérez, S. Borrós Gómez, J. C. del Real Romero, Bond strength of biodegradable bone adhesive for maxillofacial reconstructive surgery: a comparative in vitro study, en , Young Energy Economists and Engineers Seminar - YEEES 2015, Association des Economistes de l'Energie, París, 2015.. ISBN: (NULL). Repositorio: http://hdl.handle.net/11531/15476.
  • J. L. Wang, J. R. Jiménez Octavio, C. Wei, A. A. Shabana, Low order continuum-based liquid sloshing formulation for vehicle system dynamics. Journal of Computational and Nonlinear Dynamics. Vol. online, nº 2, págs. 021022-021022, Marzo de 2015.. ISSN: 1555-1423. Repositorio: http://hdl.handle.net/11531/4851.
  • A. Mikkola, A. A. Shabana, C. Sanchez Rebollo, J. R. Jiménez Octavio, Comparison between ANCF and B-spline surfaces. Multibody System Dynamics. Vol. online, nº 2, págs. 119-138, Marzo de 2013.. ISSN: 1384-5640. Repositorio: http://hdl.handle.net/11531/5000.
  • J. R. Jiménez Octavio, El binomio ciencia-técnica a examen. Miscelánea Comillas. Vol. online, nº 136, págs. 287-291, Febrero de 2013.. ISSN: 0210-9522. Repositorio: http://hdl.handle.net/11531/5062.
  • J. R. Jiménez Octavio, Ciencia y tecnología para la sociedad. Acontecimiento. Vol. online, págs. 19-20, Septiembre de 2011.. ISSN: 1698-5486. Repositorio: http://hdl.handle.net/11531/5089.
Acreditaciones externas

Sexenio Campo 6.1 - Ingenierías y Arquitectura - Tecnologías Mecánicas y de la Producción (2019-2024)..

Sexenio Campo 6.3 - Ingenierías y Arquitectura - Arquitectura, Ingeniería Civil, Construcción y Urbanismo (2013-2018)..

Sexenio Campo 6.1 - Ingenierías y Arquitectura - Tecnologías Mecánicas y de la Producción (2007-2012)..

Certificación ACAP - Profesor Contratado Doctor (27/08/2012)..

Certificación ACAP - Profesor Ayudante Doctor (27/08/2012)..

Certificación ACAP - Profesor Doctor de Universidad Privada (27/08/2012)..

© Universidad Pontificia Comillas - C/ Alberto Aguilera 23 - 28015 Madrid - Tlf. (34) 91 542 28 00